Basic Info.
Steel Degree
Tempered Glass
Thickness of Flat Tempered Glass
10MM
Thickness of Curve Tempered Glass
12MM
Technics
Physically Tempered
Usage
Building, Furniture, Home Appliance
Color
Clear,Bronze,Grey,Blue
Transport Package
Plywood Crates
Product Description
6.4mm white translucent laminated glass suppliers
Laminated Glass:The most common laminated glass units are constructed with two plies of glass permanently bonded together with one or more interlayers. The most important characteristics of laminated glass are fall-out protection due to the ability of the interlayer to support and hold the glass when broken as well as the reduced ability to penetration the opening. The ability to resist various kinds of penetration is dependent upon a number of factors including thickness of the glass and the type of interlayer selected Specification
Product: | Laminated Glass, tempered laminated glass, toughened laminated glass |
Thickness: | 4mm-19mm |
Processing Size: | Max: 3300*15000mm |
Interlayer: | PVB, SGP, thickness 0.38mm, 0.76mm, 1.14mm, 1.52mm |
Processing Glass Type: | Clear Float Glass, Tinted Glass, Low-e Glass, Reflective Glass |
| When impacted, Laminated Safety Glass is designed to remain intact or to break safely in such a way as to reduce injury; |
Feature 2:Security. | Standard Laminated Safety Glass provides resistance to physical attack. By increasing the thickness of the interlayer and its strength, including bullet and bomb resistance |
Feature 3:Noise Control | Laminated Safety Glass reduces the level of noise;Enhanced even further by incorporating an acoustic interlayer |
Tempered (Toughened) Glass
Tempered glass is made by heating ordinary glass to its softening point and then suddenly cooling down to form compression in the surface layer of the glass, thus the mechanical strength is increased by times.
Features of Tempered Glass
Safety: Once breakage occurs, the glass disintegrates into small cubical fragments which are relatively harmless to human body.
High strength: 5 times stronger than annealed glass.
Excellent thermal stability: it withstands abrupt change of temperature.
Applications
- Window and door
- Facades and curtain walls
- Automobile,train,vessel
- Furniture and decoration
SpecificationsName: | Tempered Glass |
Glass thickness: | 3mm, 4mm, 5mm, 6mm,8mm,10mm,12mm,15mm,19mm |
Glass Color: | Clear, Ultra clear, Bronze, Grey, Blue,Gold, Green....Etc |
Max Size: | 3600*17000mm |
Shap: | Flat tempered glass, Curved tempered glass |
Quality Standards
GB 15763.2, Chinese standard.
EN 12150.1, European standard.
EN 12600, European standard.
ANSI Z97.1, American standard.
AS/NZS 2208, Australian standard.
Heat Soak Test
Heat soak testing is a three-stage process that includes a ramp-up, dwelling time at 290ºC and a cool-down phase. Heat soak testing is performed on fully tempered uncoated or pyrolytic glass products to reduce the probability of spontaneous breakage due to nickel sulfide inclusions that may exist in tempered float glass.
Applications
All tempered glass should undergo heat soak test.
Specifications
Thickness: 3~19mm
Max. Size: 98"X236", (2500X6000mm)
Quality Standards
GB 15763.4, Chinese standard.
EN 14179.1, European Standard.
Bent Tempered Glass and Curved Tempered Glass
Bent Tempered Glass and Curved Tempered Glass adopt the similar process with tempered glass, but before the cooling process, using the external power bent the glass to a proper radian according to the requirement, its wind pressure resistance is better than flat tempered glass and other kinds of glass for the special shape. It widely use in esthetic architecture field for the beautiful appearance.
Applications
- Facades and curtain walls
- External walls of revolving doors and exposed elevators
- Stairs, handrails, skylights
- Partition, display shelves and furniture
Specifications
Thickness: 4~19mm
Min. Size: 9"X17", (220X430mm)
Max. Size: 96"X165", (2440X4200mm)
Curve depth: up to 500mm
Bending angle: up to 90"
Quality Standards
GB 15763.2, Chinese standard.
EN 12150.1, European Standard.
AS/NZS 2208, Australian standard.
Address:
Building No 2th, Beijianglu Road, Qingdao, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Construction & Decoration
Management System Certification:
ISO 9001, ISO 14001, OHSAS/ OHSMS 18001
Company Introduction:
Longxiang Building Materials Co., Limited (Qingdao Longxiang Building Materials Co., Ltd) is a professional Supplier and Manufacturer of aluminum extrusion profiles, Aluminum windows&doors, Aluminum glass curtain wall in China. The factory covers an area of 270, 000m2. Longxiang has 17 domestic advanced extrusion production lines and 2 oxidation electrophoresis workshop production lines. It adopts domestic advanced horizontal oxidation electrophoresis equipment and 3 spraying workshop production lines, adopting domestic advanced horizontal spraying production line.
Qingdao Longxiang Building Materials Co., Ltd. Owns 1set imported door and window production line in Germany, 4 domestic production lines such as Jinan Tianchen, and annual processing capacity of 100, 000 square meters. Compared with traditional aluminum alloy doors and windows, self-developed door&window systems (D&W CHAMPION brand, including 65series, 70series, 80series, 100series, 150series...etc ) and aluminum glass curtain wall system has reached the domestic advanced level in terms of water tightness, air tightness, wind pressure resistance, heat insulation, noise, beauty and practicality.